Anmol Chemicals

Anmol Chemicals is a several decades old company. It is the pioneer manufacturers of Calcium Hydroxide, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. It has several manufacturing facilities spread across India. The group has toll manufacturers and representatives in UAE, Europe, Canada & USA. All the Information on Physics, Chemistry, Applications, Uses and Technology of Manufacture is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ----------------Contact
Bookmark this Website Site

 Drum Packing Palletized Drum Packing Palletized & Shrink Wrapped. 25 50kg HDPE Laminated Bags. Exports to USA UAE Europe Tanzania Kenya Egypt Turkey Brazil Chile Argentina Dubai Hydrated Slaked Lime Calcium hydroxide BP USP ACS Analytical Reagent FCC Food Grade Manufacturers Jumbo Packing

Calcium Hydroxide Ca(OH)2 BP  USP IP FCC Food Grade Manufacturers

Calcium Hydroxide
Technical & Pure Slaked Lime, Hydrated Lime
IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Calcium Hydroxide

English Calcium Hydroxide Manufacturers
Arabic الجير ممية، المصنعين هيدروكسيد الكالسيوم
Italian Cal hidratado, fabricantes de hidróxido de cálcio
German Hydratisierter Kalk, Calciumhydroxid Hersteller
Dutch Gehydrateerd Lime, calciumhydroxide fabrikanten
Spanish Cal hidratada, fabricantes de hidróxido de calcio
French Chaux éteinte, fabricants d'hydroxyde de Calcium
Portuguese Cal hidratada, fabricantes de hidróxido de cálcio

Calcium Hydroxide MSDS
Specifications of Calcium Hydroxide
Buy Calcium Hydroxide; Door Delivery
Calcium Hydroxide BP USP IP ACS Analytical Reagent FCC Food Grade Manufacturers

Calcium Hydroxide BP British Pharmacopoeia

Ca(OH)2 -- 74.1

Preparation
Calcium Hydroxide Solution

DEFINITION
Content
95.0 per cent to 100.5 per cent.

CHARACTERS
Appearance
White or almost white, fine powder.
Solubility
Practically insoluble in water.

IDENTIFICATION
A. To 0.80 g in a mortar, add 10 ml of water R and 0.5 ml of phenolphthalein solution and mix. The suspension turns red. On addition of 17.5 ml of 1 M hydrochloric acid , the suspension becomes colourless without effervescing. The red colour occurs again when the mixture is triturated for 1 min. On addition of a further 6 ml of 1 M hydrochloric acid and triturating, the solution becomes colourless.
B. Dissolve about 0.1 g in dilute hydrochloric acid and dilute to 10 ml with water . 5 ml of the solution give reaction of calcium.

TESTS
Matter insoluble in hydrochloric acid
Maximum 0.5 per cent.
Dissolve 2.0 g in 30 ml of hydrochloric acid. Boil the solution and filter. Wash the residue with hot water. The residue weighs a maximum of 10 mg.
Carbonates
Maximum 5.0 per cent of CaCO3.
Chlorides
Maximum 330 ppm.
Sulphates
Maximum 0.4 per cent.
Arsenic
Maximum 4 ppm.
Magnesium and alkali metals
Maximum 4.0 per cent calculated as sulphates.
Heavy metals
Maximum 20 ppm.

ASSAY
To 1.500 g in a mortar, add 20-30 ml of water R and 0.5 ml of phenolphthalein solution. Titrate with 1 M hydrochloric acid by triturating the substance until the red colour disappears. The final solution is used in the tests for carbonates.
1 ml of 1 M hydrochloric acid is equivalent to 37.05 mg of Ca(OH)2.


Calcium Hydroxide USP Ca(OH)2

Calcium Hydroxide; Lime
Ca(OH)2 -- 74.09
Calcium hydroxide [1305-62-0].
Calcium Hydroxide contains not less than 95.0 percent and not more than 100.5 percent of Ca(OH)2.
Packaging and storage— Preserve in tight containers.
Identification
A: When mixed with from three to four times its weight of water, it forms a smooth magma. The clear, supernatant from the magma is alkaline to litmus.
B: Mix 1 g with 20 mL of water, and add sufficient 6 N acetic acid to effect solution: the resulting solution responds to the tests for Calcium.
Limit of acid-insoluble substances— Dissolve 2.0 g in 30 mL of 4 N hydrochloric acid, and heat to boiling. Filter the mixture, wash the residue with hot water, and ignite: the weight of the residue does not exceed 10 mg (0.5%).
Carbonate— Mix 2 g with 50 mL of water: the addition of an excess of 3 N hydrochloric acid to the mixture does not cause more than a slight effervescence.
Heavy metals— Dissolve 2.0 g in 20 mL of 3 N hydrochloric acid, and evaporate on a steam bath to dryness. Dissolve the residue in 20 mL of water, and filter. Dilute the filtrate with water to 40 mL, and to 20 mL of the resulting solution add 1 mL of 0.1 N hydrochloric acid, then add water to make 25 mL: the limit is 20 6g per g.
Limit of magnesium and alkali salts— Dissolve 0.50 g in a mixture of 30 mL of water and 10 mL of 3 N hydrochloric acid, and proceed as directed in the test for Magnesium and alkali salts under Calcium Carbonate, beginning with “heat the solution, and boil for 1 minute.” The weight of the residue does not exceed 12 mg (4.8%).
Assay— Transfer about 1.5 g of Calcium Hydroxide, accurately weighed, to a beaker, and gradually add 30 mL of 3 N hydrochloric acid. When the solution is dissolved, transfer it to a 500-mL volumetric flask, rinse the beaker thoroughly, adding the rinsing to the flask, dilute with water to volume, and mix. Pipette 50 mL of the solution into a suitable container, add 100 mL of water, 15 mL of 1 N sodium hydroxide, and 300 mg of hydroxy naphthol blue, and titrate with 0.05 M edentate disodium VS to a blue endpoint. Each mL of 0.05 M edetate disodium is equivalent to 3.705 mg of Ca(OH)2.


Calcium Hydroxide FCC Food Grade

Slaked Lime
Calcium Hydroxide
Ca(OH)2 Formula wt 74.10
INS: 526 CAS: [1305-62-0]

DESCRIPTION
Calcium Hydroxide occurs as a white powder. One gram dissolves in 630 mL of water at 25°, and in 1300 mL of boiling water. It is soluble in glycerin and in a saturated solution of sucrose but insoluble in alcohol.
Function: Buffer; neutralizing agent; firming agent.

REQUIREMENTS
Identification
A. Mix a sample with from 3 to 4 times its weight of water. The sample forms a smooth magma. The clear, supernatant liquid from the magma is alkaline to litmus.
B. Mix 1 g of sample with 20 mL of water, and add sufficient glacial acetic acid to effect solution. The resulting solution gives positive tests for Calcium.
Assay: Not less than 95.0% and not more than 100.5% of Ca(OH)2.
Acid-Insoluble Substances: Not more than 0.5%.
Arsenic: Not more than 3 mg/kg.
Carbonate: Passes test.
Fluoride: Not more than 0.005%.
Lead: Not more than 2 mg/kg.
Magnesium and Alkali Salts: Not more than 4.8%.


Calcium Hydroxide ACS Analytical Reagent

Calcium Hydroxide
Ca(OH)2
Formula Wt 74.09
CAS Number 1305-62-0

REQUIREMENTS
Assay: 95.0% Ca(OH)2  and 3.0% CaCO3

MAXIMUM ALLOWABLE
Insoluble in hydrochloric acid: 0.03%
Chloride (Cl): 0.03%
Sulfur compounds (as SO4): 0.1%
Heavy metals (as Pb): 0.003%
Iron (Fe): 0.05%
Magnesium (Mg): 0.5%
Potassium (K): 0.05%
Sodium (Na): 0.05%
Strontium (Sr): 0.05%

For uses of Calcium Hydroxide please go to Hydrated Lime Slaked Lime Uses

If you are looking for Calcium Oxide or Quick Lime, please go to Calcium Oxide Manufacturers

Calcium Hydroxide BP USP ACS FCC Food Grade Manufacturers
Calcium Hydroxide Slaked Lime Hydrated Lime Manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Anmol Chemicals

Ca(OH)2 BP -- Ca(OH)2 USP Hydrated Lime Manufacturers -- Ca(OH)2 FCC; Food Grade-Slaked Lime Manufacturers -- Ca(OH)2 ACS

Calcium Hydroxide Manufacturers Calcium Chloride Calcium Chloride BP USP .. Calcium Phosphate
Calcium Oxide Calcium Sulfate Calcium Saccharate Calcium Stearate

Ammonium persulfate -- Calcium Oxide -- Calcium Hydroxide -- Calcium Sulfate

Exports to USA, Canada,  UAE, Europe, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

Copyright and Usual Disclaimer is Applicable. 30 July, 2014